Rates
Costs
-
$80/hour for staff time, including bench work, data analysis, etc.
-
$49/hour (Velos) to $80/hour (Orbitrap Fusion) for analysis time on a Mass Spectrometer. Rates vary from instrument to instrument and are based on usage and operation/maintenance costs. Older instruments tend to be cheaper and newer instruments tend to cost more.Instrument rates are discounted after the first 8 hours of analysis time to accommodate larger experiments.
-
Cost of supplies for specialized procedures.
Identification of proteins in a single LC/MS analysis (including preparation of the digest) costs about $450, while the cost of a large scale, TMT-labeled quantitative proteomics experiment can easily be $10,000+.
Below are a few example billings for common projects. Please note that no two analyses are the same and your costs may vary from what is in the examples. They are intended to provide some basic guidance when planning an experiment. If you would like a more firm cost estimate for your project please contact PSR and we can meet with you to prepare a quote.
10 protein ID samples from gel
As you can see from the first two examples, the cost per sample goes down significantly as the number of samples increases. This is because certain processes, such as trypsin digests and data analysis, can be done in batches without adding much to the total staff time. Additional analyses such as PTM localization will usually require an extra 2-8 hours of staff time to process the data. The amount of work depends heavily on the nature of the PTM(s) being sought, and the number of potential sites found.
Initial consultation on a project with PSR is recommended to avoid problems arising in the sample preparation process. Mass Spectrometers are highly sensitive instruments and require very clean samples to give the best results. The fee for hourly staff time is waived for the initial consultation(s) to encourage coordination with PSR. Also, a list of some recommended procedures can be found in the Procedures section of the website. After consulting with PSR some of these procedures can be done in your laboratory using either your own reagents or some of ours. We can work with you to help you learn these procedures saving you money on future experiments done through PSR.